
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X220-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 220mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X220-20 is a double-acting ISO 15552 profile cylinder featuring an external rear stroke adjuster. It provides a usable travel window of 200 to 220 mm, allowing you to fine-tune the retract end position during commissioning without adding external stops.
This 40 mm bore model features a PT tapered port thread and a 16 mm carbon steel rod. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of position switches. It supports speeds from 30 to 800 mm/s and uses adjustable air cushions at both ends to manage deceleration.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X220-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 200-220 mm retract position during product size transitions without swapping out the entire cylinder assembly.
Fine-tune the stroke end-point during initial commissioning to compensate for mechanical tolerance variations in the fixture.
Adjust the stopping distance on the fly for products of varying lengths moving along a conveyor line.
Choose this adjustable-stroke model when your machine setup requires variable end-stops or frequent product-size changeovers, rather than relying on a fixed-stroke SAI cylinder. If your application requires less force, stepping down to a 32 mm bore yields 402 N at 0.5 MPa; if you need more power, stepping up to a 50 mm bore provides 982 N.
For a direct ISO 15552 replacement, match the 40 mm bore, 220 mm stroke, 20 mm adjustment, PT port thread, and standard carbon steel rod. Note that the rear adjuster acts as a travel stop, not a lock, so it will not hold a load without live air pressure. Since the 220 mm stroke is relatively long, ensure you use an external guide to prevent excessive side-loading on the 16 mm rod. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The maximum push force reaches 1130 N at 0.9 MPa.
The rear adjusting screw allows you to shorten the effective travel from the nominal 220 mm down to 200 mm, creating a 200-220 mm adjustable window. The adjuster functions as a mechanical stop to set the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.