
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X220-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 220mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X220-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 220 mm stroke that can be fine-tuned backward by up to 30 mm, creating a precise 190-220 mm usable travel window.
This model features a standard carbon steel piston rod with an M12x1.25 thread and a PT tapered G1/4 port. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to add CMSE or DMSE switches later if positioning feedback becomes necessary. Adjustable air cushions at both ends absorb impact, while the rear stopper screw lets you dial in the exact end position during commissioning without adding external stops.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X220-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 190-220 mm end position during initial setup without swapping out the entire cylinder or fabricating external spacers.
Quickly adjust the retract stop by up to 30 mm to accommodate slightly different product sizes on the same production line.
The adjustable 190-220 mm travel window is ideal for product changeovers or fine-tuning a new machine setup, offering flexibility a fixed-stroke SAI cylinder cannot match. To replace this cylinder with an ISO 15552 equivalent, match the 40 mm bore, 220 mm stroke, 30 mm adjustment, PT G1/4 port, and your required mounting bracket.
Because the 220 mm stroke is moderately long, ensure adequate external guiding to prevent side-loading damage to the M12x1.25 rod. Remember that the rear adjuster acts only as a travel stop, not a lock; the cylinder cannot hold a load without live air. For true load-holding without pressure, consider an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
It features a rear stopper screw that allows you to trim the effective stroke by up to 30 mm. This creates a usable travel window of 190-220 mm, letting you set the exact retract end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.