
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X220-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 220mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X220-40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 220 mm stroke that can be dialed back by up to 40 mm, giving you a precise 180-220 mm usable travel window for product changeovers. The extruded aluminum barrel includes sensor grooves on both sides, and the -S option provides a magnet for position feedback.
This model uses a PT tapered G1/4 port and a 16 mm carbon steel rod with an M12x1.25 thread. The rear adjuster functions strictly as a mechanical stop to fine-tune the retract end position without swapping the cylinder. It is not a locking mechanism, so the cylinder cannot hold loads without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X220-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract position within the 180-220 mm window during machine setup without adding external stops or replacing the cylinder.
Quickly adjust the travel end-stop on packaging lines when handling different carton lengths or box widths on the fly.
Dial in the exact retract distance for multi-stage assembly processes where the rear stop point must be tweaked between production runs.
Choose this 40 mm bore adjustable-stroke cylinder when your application requires variable end-stop positioning during commissioning or when accommodating slight product size changes on a line. Since this is an SAIJ model, the available mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on other variants.
This SKU is dimensionally interchangeable per ISO 15552. To match it exactly for a replacement, verify the 220 mm stroke, 40 mm adjustment range, PT port thread, and the -S magnet requirement. Because the stroke is 220 mm, ensure your setup manages side loads; the 16 mm rod handles typical duties, but long unsupported strokes still require an external guide rail to prevent premature wear.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the nominal 220 mm down to 180 mm. It only sets the end position and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.