verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X220-75

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X220-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 220mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke220 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$82.31 $89.81Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X220-75

The AirTAC SAIJ40X220-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster that creates a 145 to 220 mm usable travel window.

This adjustable-stroke model allows precise end-position tuning at commissioning without swapping the cylinder or adding external stops. The rear screw acts purely as a travel stop for deceleration, not a load lock, and the extruded aluminum barrel includes dual sensor grooves for flexible switch placement.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X220-75 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X220-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke220 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X220-75

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×220Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X220-75 Is Used

tune

Product Changeover

Dial in the 145 to 220 mm travel window on the fly to accommodate different package lengths without changing out physical hard stops.

settings_input_component

Commissioning Calibration

Fine-tune the retract end-position during machine setup to perfectly align tooling, avoiding the need to machine custom spacer blocks.

conveyor_belt

Variable End Stops

Act as an adjustable physical stop for diverter gates on a conveyor line, allowing operators to quickly reset stroke limits for new product runs.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X220-75 the Right Cylinder?

The generous 75 mm adjustment range is perfect for machines requiring frequent product-size changeovers, providing variable end-stops that a fixed-stroke SAI cannot match.

For a direct ISO 15552 replacement, match the 40 mm bore, 220 mm stroke, 75 mm adjust code, PT port thread, and standard carbon steel rod. Because the 220 mm stroke exceeds 300 mm, standard guiding rules apply, but always ensure external guides support the load if side forces are present. If your process requires holding the load without live air pressure, select an external rod lock or a SAIL cylinder instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X220-75 FAQ

At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.

The rear adjuster screw lets you trim the effective travel back by up to 75 mm from the 220 mm nominal stroke, creating a 145 to 220 mm window. It acts as a mechanical stop to set the end position and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X220-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X220-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.