
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X225-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 225mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X225-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 225 mm nominal stroke that can be dialed back by up to 100 mm, creating a highly flexible 125-225 mm usable travel window for precise end-position tuning during commissioning.
This variant includes a magnet for position sensing and uses a standard carbon steel piston rod with an M12x1.25 thread. Because it is a profile cylinder with an extruded aluminum barrel, it integrates sensor grooves on both sides for CMSE reed or DMSE electronic switches. The rear adjuster acts purely as a mechanical stop to set the travel end and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X225-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 125-225 mm window during machine commissioning to accommodate different product lengths without adding external stops.
Rapidly adjust the stroke by up to 100 mm on packaging lines when switching between container sizes, minimizing downtime and avoiding cylinder swaps.
Fine-tune the end-of-travel position on pressing or seating stations to account for material variance, ensuring precise force application at 0.5 MPa.
Choose this adjustable-stroke model when your application requires variable end stops or frequent product-size changeovers without swapping the entire cylinder. If you need less fine-tuning range, a smaller adjustment code like -50 would suffice, but the -100 code offers maximum flexibility for a 225 mm stroke. Conversely, lighter duties can use the 32 mm bore at 402 N.
For an exact ISO 15552 replacement, match the 40 mm bore, 225 mm stroke, 100 mm adjustment, PT tapered port thread, and the -S magnet option. Mounting is limited to the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Since the stroke is over 200 mm, ensure adequate external guidance to prevent excessive side-loading on the M12x1.25 rod. For load-holding without live air, select a SAIL or BSAI cylinder instead of relying on this stopper.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 100 mm. This turns the 225 mm nominal stroke into a 125-225 mm usable travel window. The adjuster functions only as a travel stop and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.