
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X230-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 230mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X230-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 220 to 230 mm. The integrated magnet (-S) enables direct position sensing.
This adjustable-stroke design allows you to fine-tune the retract end position at commissioning without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. The rear adjuster acts purely as a travel stop for deceleration and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X230-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 220 to 230 mm retraction distance during initial commissioning to perfectly align tooling without machining new hard stops.
Quickly adjust the end position by up to 10 mm on a packaging line when switching to a different carton size, minimizing downtime.
Fine-tune the retract stop on a light assembly press to accommodate varying material thicknesses while relying on the standard air cushion for deceleration.
The 10 mm adjustment window is ideal for dialing in exact retraction distances during machine setup or product changeovers, avoiding the need to swap out a fixed-stroke SAI cylinder. To match this ISO 15552 cylinder, confirm the 230 mm stroke, 10 mm adjustment, PT port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the stroke is 230 mm, ensure adequate external guiding to prevent excessive side loading on the rod. For load-holding without continuous air pressure, consider an external rod lock or pilot-operated check valve, as the adjuster is not a brake.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 10 mm, creating a 220 to 230 mm travel window. It functions as a mechanical stop to set the end position and is not a locking device.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.