verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X230-75

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X230-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 230mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke230 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$84.64 $92.14Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X230-75

The AirTAC SAIJ40X230-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 230 mm stroke that can be dialed back by up to 75 mm, creating a highly flexible 155 to 230 mm usable travel window for precise end-position tuning.

This model uses a 16 mm carbon steel rod with an M12x1.25 thread, offering solid resistance to side loading, though long unsupported strokes still require external guidance. It features variable air cushions at both ends with a 30 mm cushion length to manage kinetic energy. The mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 attachments, deliberately omitting FB, CA, CB, and CR brackets to streamline the adjustable rear assembly.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X230-75 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X230-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke230 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X230-75

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×230Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X230-75 Is Used

tune

Machine Changeover

Dial in the 155-230 mm travel window during product size transitions without replacing the cylinder or adding external mechanical stops.

precision_manufacturing

End-Position Tuning

Use the 75 mm rear adjuster to precisely set the retract distance for tooling alignment at commissioning.

conveyor_belt

Variable End Stops

Accommodate varying package sizes on a conveyor by adjusting the stroke back from the 230 mm maximum to meet exact spacing needs.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X230-75 the Right Cylinder?

The 75 mm adjustment range is ideal for product changeovers on a line, allowing you to fine-tune the retract end-stop at commissioning without swapping the cylinder or adding external stops. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider the SAIL or BSAI series. To match this ISO 15552 replacement exactly, verify the 230 mm stroke, 75 mm adjustment, PT port, and standard carbon steel rod. Since the stroke is 230 mm, ensure an external guide is used if the load is heavy or off-center.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X230-75 FAQ

The rear adjusting screw acts as a mechanical stopper that shortens the effective stroke. For this 230 mm nominal stroke model, you can trim the travel back by up to 75 mm, resulting in a usable travel window of 155 to 230 mm.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X230-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X230-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.