
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X240-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 240mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X240-50 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 190-240 mm usable travel window, allowing you to dial back the 240 mm nominal stroke by up to 50 mm during commissioning without adding external stops.
This extruded aluminum profile cylinder uses a standard PT G1/4 port and a 16 mm carbon steel rod with an M12x1.25 thread. The rear adjuster acts purely as a mechanical stop to set the retract end position; it is not a locking device and will not hold a load without continuous air pressure. For position holding, an external pilot-operated check valve or a related SAIL lock cylinder is required.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X240-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 190-240 mm travel window on the fly to accommodate different package lengths on a packaging line without swapping cylinders.
Fine-tune the retract position during machine commissioning using the rear screw, preventing hard crashes and ensuring precise mechanical alignment.
If your application requires less force, the 32 mm bore offers 402 N; if you need more thrust, stepping up to the 50 mm bore provides 982 N. The adjustable 190-240 mm travel window is ideal for product changeovers on a line, whereas a fixed-stroke SAI cylinder is better for rigid, unchanging end stops.
Because the 240 mm stroke exceeds 300 mm? No, but for any long-stroke setup, ensure external guides support the load to prevent side-loading on the 16 mm rod. This SAIJ model supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, CR). It is dimensionally interchangeable per ISO 15552 and uses standard PT tapered ports without a magnet.
Quick checklist
If you increase the operating pressure to 0.7 MPa, the push force rises to 879 N.
The rear adjuster screw lets you mechanically shorten the effective stroke from 240 mm down to 190 mm. This creates a 190-240 mm travel window for fine-tuning the end position at commissioning, but the screw acts only as a stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.