
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X240-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 240mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X240-75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 165 to 240 mm, allowing you to dial back the nominal stroke by up to 75 mm during commissioning. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches for precise position detection.
This model uses a carbon steel piston rod with an M12x1.25 thread, offering robust resistance to side loads, though strokes of this length still benefit from an external guide. The rear adjuster acts purely as a mechanical stop to fine-tune the end position without adding external stops; it is not a lock, so the cylinder cannot hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X240-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop from 165 to 240 mm during product size changes without physically swapping cylinders or adding external mechanical stops.
Fine-tune the retract end position during commissioning to account for mechanical tolerances in fixturing and tooling layouts.
Adjust the stroke on the fly to accommodate varying package dimensions or pallet sizes directly on the production floor.
The 75 mm adjustment range is ideal for product changeovers on a packaging line, letting operators fine-tune the travel window from 165 to 240 mm without swapping out the cylinder. If your process requires less force, stepping down to a 32 mm bore yields 402 N; if you need more clamping power, moving up to a 50 mm bore provides 982 N.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 240 mm stroke, 75 mm adjustment code, PT tapered port threads, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR variants. Because the 240 mm stroke exceeds 300 mm? No, but at 240 mm it is approaching lengths where guiding the load is recommended to prevent rod side-load wear.
Quick checklist
At the maximum pressure of 1.0 MPa, it can deliver up to 128 kgf.
The rear adjuster screw lets you shorten the effective travel from the nominal 240 mm down to 165 mm. This creates a 75 mm adjustable window for setting the exact end position, but it acts only as a stop and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.