
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X25-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 25mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X25-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The built-in rear stopper allows you to trim the 25mm nominal stroke back by up to 10mm, creating a precise 15-25mm usable travel window for exact end-position tuning.
This adjustable design eliminates the need to swap cylinders or add external stops during machine commissioning or product changeover. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. The standard carbon steel rod features an M12x1.25 thread, and the cylinder supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X25-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 15-25mm travel window during machine setup to achieve exact positioning without machining external stopper blocks.
Quickly adjust the end-stop position on a packaging line when handling slightly different product sizes on the fly.
The 10mm adjustment range is ideal for dialing in a short 25mm stroke without swapping physical components. Because the rear adjuster acts only as a travel stop and the air cushions manage deceleration, this cylinder cannot hold a load without live air pressure. For load-holding requirements, consider an AirTAC SAIL or BSAI model. As a dimensionally interchangeable ISO 15552 cylinder, it matches standard bore, stroke, PT port, and mounting footprints.
Quick checklist
The rear adjusting screw acts as an external stopper that can shorten the effective stroke by up to 10mm. This creates a usable travel window of 15-25mm, allowing you to fine-tune the retract end position at commissioning without replacing the cylinder.
At 0.7 MPa, the push force increases to 879N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.