
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X25-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 25mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X25-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 15 to 25 mm for precise end-position tuning. Because this is a -S variant, it includes a built-in magnet for position sensing.
The rear adjuster acts as a mechanical stop to dial in the retract distance during commissioning without adding external stops, though it will not hold the load without live air. This extruded aluminum cylinder uses a PT tapered port (G1/4) and supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X25-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 15 to 25 mm retract distance during machine commissioning to perfect short clamping or pressing motions.
Quickly adjust the rear stopper by up to 10 mm to accommodate slight part height variations on a production line without changing cylinders.
Leverage the built-in magnet with DMSE electronic sensors to confirm the adjusted end position in automated assembly sequences.
The 10 mm adjustment range is ideal for short-stroke setups requiring exact end-stop tuning rather than a fixed SAI cylinder. For holding loads without live air pressure, consider an external rod lock or the SAIL lock variant, as the SAIJ adjuster is strictly a travel stop.
To replace an ISO 15552 cylinder, match the 40 mm bore, 25 mm stroke, 10 mm adjustment, PT G1/4 port, and the -S magnet requirement. The M12x1.25 rod thread handles moderate side loads, but even at 25 mm, ensure the load is guided to prevent binding. This -S model supports AirTAC CMSE reed and DMSE electronic sensors.
Quick checklist
At a maximum 1.0 MPa operating pressure, it achieves 128 kgf.
The rear adjuster acts as a mechanical stop that lets you trim the effective stroke back by up to 10 mm, creating a 15 to 25 mm usable travel window. It sets the end position but does not lock or hold the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.