
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X25-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 25mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X25-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The integrated adjuster allows you to trim the 25mm nominal stroke back by up to 20mm, creating a highly precise 5-25mm usable travel window for exacting end-position tuning.
This adjustable stopper lets you fine-tune the retract position during commissioning without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, though this specific SKU is configured without a magnet. It uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X25-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 5-25mm clamping depth during machine commissioning to prevent part deformation without machining custom stopper blocks.
Quickly adjust the retract end-stop by up to 20mm when switching between slightly different product sizes on the same production line.
Execute delicate short-stroke pressing or forming tasks where the exact bottoming position must be tuned on-site to achieve the perfect result.
Select this 40mm bore when an application requires precise positioning within a 5-25mm travel window, as the rear screw eliminates the need for custom spacers during product changeovers. If your setup demands less force, stepping down to a 32mm bore yields 402N at 0.5 MPa; stepping up to a 50mm bore provides 982N. Remember that the rear adjuster acts strictly as a travel stop and does not hold the load without live air—always use a SAIL or BSAI cylinder if true lock-holding is required. To match this ISO 15552 footprint exactly, specify the 40mm bore, 25mm stroke, 20mm adjustment, PT port, and no magnet.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke by up to 20mm. This creates a usable travel window of 5-25mm, allowing you to fine-tune the end position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.