
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X250-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 250mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X250-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 250mm nominal stroke that can be dialed back by up to 100mm, giving you a wide 150-250mm usable travel window for precise end-position tuning during commissioning.
Unlike a fixed-stroke SAI, this model integrates an external stopper at the rear cap, eliminating the need to swap cylinders or bolt on external stops when product sizes change. The adjuster acts solely as a travel stop and works alongside the 30mm variable air cushions at both ends to decelerate the piston. It does not hold the load without live air pressure; for load-holding requirements, consider the SAIL or BSAI series.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X250-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 150 to 250mm when switching a packaging line to a different carton size, skipping physical stop swaps.
Fine-tune the final resting position during initial commissioning to perfectly align a 40mm bore pressing action without shimming.
Adjust the physical stopper distance on the fly to handle mixed-product conveyor flows where exact end-of-travel points vary.
If your setup demands less force, stepping down to a 32mm bore yields 402N at 0.5MPa, while moving up to a 50mm bore provides 982N. The 100mm adjustment range is ideal for machines processing varying product sizes, allowing you to fine-tune the retract end-position without mechanical modifications.
Because the 250mm stroke exceeds 300mm when fully extended, ensure you use an external guide rail to support the load and prevent excessive side-load wear on the rod seals. This SKU is dimensionally interchangeable per ISO 15552 and is configured with PT tapered ports, a 16mm carbon steel rod, and no magnet. The mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options. For position feedback, adding the -S magnet option allows the use of AirTAC CMSE reed or DMSE electronic solid-state sensors in the dual-side sensor grooves.
Quick checklist
If you increase the supply pressure to 0.7MPa, the push force rises to 879N.
The rear adjuster screw lets you shorten the effective travel from the 250mm nominal stroke down to 150mm. This creates a 150-250mm usable window, acting as a mechanical stop to set the exact retract end-position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.