verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X250-30

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X250-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 250mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke250 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$84.64 $92.14Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X250-30

The AirTAC SAIJ40X250-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the effective travel anywhere within a 220-250 mm window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.

Because the external stopper acts solely as a travel limit and not a locking device, it cannot hold a load without continuous live air pressure. For load-holding requirements without air, consider an external rod lock or the AirTAC SAIL and BSAI series. This model supports a speed range of 30-800 mm/s and utilizes variable air cushions at both ends to manage deceleration.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X250-30 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X250-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke250 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X250-30

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×250Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X250-30 Is Used

tune

Machine Changeover

Quickly reposition the rear stopper during product size changes to set a new 220-250 mm travel limit without replacing the cylinder.

precision_manufacturing

End-Position Tuning

Dial in the exact retraction point during commissioning to compensate for mechanical tolerances without adding external shims.

conveyor_belt

Variable Stops

Provide adjustable physical end stops for diverter arms or pushing mechanisms that handle varying package sizes on a line.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X250-30 the Right Cylinder?

The adjustable stroke is ideal for machine setup and product changeovers, letting you dial in the exact 220-250 mm end position without swapping the cylinder or adding external stops. When replacing an ISO 15552 cylinder, match the 40 mm bore, 250 mm nominal stroke, 30 mm adjustment, PT port thread, and mounting style.

With a 250 mm stroke, the 16 mm diameter carbon steel rod handles moderate side loads, but long unsupported travel still requires an external guide rail to prevent rod bending. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR brackets found on some other series.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X250-30 FAQ

The rear adjuster screw lets you shorten the nominal 250 mm stroke by up to 30 mm, creating a usable travel window of 220-250 mm. It acts as a mechanical stop to set the end position and does not lock the load without live air pressure.

At 0.7 MPa, the push force increases to 879 N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X250-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X250-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.