
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X250-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 250mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X250-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 250 mm nominal stroke that can be dialed back by up to 75 mm, creating a 175-250 mm usable travel window for exact end-position tuning during commissioning. Delivering 628 N of pull force at 0.5 MPa, it is well-suited for medium-duty positioning tasks.
This model features a carbon steel piston rod with an M12x1.25 thread, paired with 30 mm variable air cushions at both ends to decelerate the moving load. The extruded aluminum barrel includes sensor grooves on both sides for fitting CMSE reed or DMSE electronic switches. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X250-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 175-250 mm retract position on the fly when switching a packaging line to a new carton size, eliminating the need to physically swap cylinders.
Fine-tune the end-of-stroke stop during initial commissioning to perfect a pressing or indexing operation without machining external stopper blocks.
Adjust the stroke on a diverter arm to accommodate different package lengths on a conveyor belt while maintaining the same pneumatic footprint.
Choose this 40 mm bore when you need the 628 N pull force at 0.5 MPa, stepping down from a 50 mm bore (982 N pull) for lighter loads, or up from a 32 mm bore (345 N pull) when more thrust is required. The 75 mm adjustment range is ideal for machines running multiple product sizes, allowing you to fine-tune the retract end-position without swapping the cylinder or adding external stops. For load-holding without continuous air pressure, select the SAIL or BSAI series instead, as the SAIJ adjuster is not a lock.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 250 mm stroke, PT tapered port threads, and the required mounting accessory from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 250 mm stroke is relatively long, an external guide rail is recommended to prevent excessive side-loading on the M12x1.25 rod.
Quick checklist
At 0.7 MPa, the push force increases to 879 N. The operating speed range is 30-800 mm/s.
The rear adjuster screw lets you shorten the 250 mm nominal stroke by up to 75 mm, providing a usable travel window of 175-250 mm. It functions as a mechanical stop to set the end position and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.