
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X260-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 260mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X260-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 260 mm stroke that can be dialed back by up to 100 mm, creating a wide 160-260 mm usable travel window for highly flexible end-position tuning.
This extruded aluminum profile barrel omits tie-rod construction and includes sensor grooves on both sides. It uses a PT tapered port thread and a 16 mm carbon steel rod with an M12x1.25 thread. The rear adjuster acts purely as a mechanical travel stop for deceleration and end-position setting; it is not a locking device and will not hold a load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X260-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 160 to 260 mm travel distance during machine commissioning to perfect end-of-stroke positions without swapping cylinders.
Quickly adjust the retract stop by up to 100 mm when production lines switch to a different sized package or component.
Use the rear mechanical stopper to fine-tune the stroke window on new fixtures, avoiding the need to bolt on external physical stops.
The 100 mm adjustment range is ideal for machines running multiple product sizes, allowing you to reposition the end-stop at commissioning rather than installing external stops or buying a different fixed-stroke SAI cylinder.
For an exact ISO 15552 replacement, match the 40 mm bore, 260 mm stroke, 100 mm adjustment, PT G1/4 port, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2, omitting FB/CA/CB/CR). Because the 260 mm stroke is over 300 mm? No, but for any long stroke, ensure external guides support the load to prevent rod side-loading. For load-holding without live pressure, select an external rod lock or pilot-operated check valve instead.
Quick checklist
The rear adjuster screw lets you shorten the 260 mm nominal stroke by up to 100 mm, giving an effective travel window of 160 to 260 mm. It acts as a travel stop and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.