
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X260-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 260mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X260-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 230 to 260 mm, allowing you to dial in the exact retract position during commissioning without adding external stops.
This model uses a standard carbon steel piston rod with an M12x1.25 thread and PT tapered port threads. The extruded aluminum barrel includes dual-side sensor grooves, and while this specific SKU lacks a magnet, you can fit position switches on compatible variants to use CMSE reed or DMSE solid-state sensors. It carries the standard SAIJ mounting set, including Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting the FB, CA, CB, and CR options.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X260-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly modify the retract end-stop by up to 30 mm when switching a packaging line to accommodate different product sizes without swapping the cylinder.
Fine-tune the 230 to 260 mm travel window during initial commissioning to perfectly align a pusher plate without machining external spacers.
Dial in the exact retraction distance for a clamping or pressing action, ensuring delicate components are engaged with the correct mechanical stop.
Choose this 40 mm bore adjustable cylinder when your setup requires precise end-position tuning that a fixed-stroke SAI cannot provide.
Remember that the rear adjuster functions strictly as a travel stop, not a lock, meaning it will not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series. Because the 260 mm stroke is substantial, the M12x1.25 rod will experience side loads; ensure you use an external guide to prevent binding over this extended travel. To match this SKU for an ISO 15552 replacement, specify the 40 mm bore, 260 mm stroke, 30 mm adjustment, PT port, and no magnet.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force reaches 879 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from the nominal 260 mm down to 230 mm. It allows precise end-position tuning during setup but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.