
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X260-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 260mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By turning the external rear stopper screw, you can trim the nominal 260mm travel back by up to 40mm, creating a precise 220-260mm usable window. This allows for exact end-position tuning during commissioning without swapping out the cylinder or adding external stops.
Built with a carbon steel piston rod and PT tapered port threads, it integrates seamlessly into existing setups. The extruded aluminum barrel includes sensor grooves on both sides, and while this unit lacks a magnet, adding the -S option enables compatibility with AirTAC CMSE reed and DMSE electronic solid-state sensors. The rear adjuster functions strictly as a travel stop to set deceleration endpoints, not as a lock, meaning it cannot hold a load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X260-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 220-260mm end-position during initial commissioning to accommodate mechanical tolerances without machining custom spacers.
Quickly adjust the travel distance on packaging lines when switching between different product sizes, using the rear screw to set the new endpoint.
Fine-tune the clamping reach on light assembly fixtures where the exact material thickness or position might vary slightly between runs.
The adjustable 220-260mm stroke is perfect for applications requiring variable end-stops or product changeovers, whereas a fixed-stroke SAI cylinder would require physical shims or replacements to achieve the same result.
Because the stroke is 260mm, the 16mm rod diameter should be evaluated for side-load; an external guide is recommended for heavy or off-center loads to prevent uneven wear. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. If your process requires true load-holding without continuous air pressure, consider the SAIL (air-released lock) or BSAI (clamp-lock) series instead.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from the nominal 260mm down to 220mm. It sets the deceleration endpoint but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.