
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X260-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 260mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X260-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to dial in the exact retract end-position during commissioning without adding external stops.
The extruded aluminum barrel incorporates sensor grooves on both sides for flexible switch mounting. It uses a standard carbon steel piston rod with an M12x1.25 thread, and ports are PT tapered G1/4. The rear adjuster acts purely as a mechanical stop to set the travel limit and is not a locking device, meaning the cylinder cannot hold a load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X260-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly modify the retract end-position by up to 75mm when switching between product sizes on a packaging line, eliminating the need to physically swap cylinders.
Fine-tune the 260mm stroke during initial setup to achieve precise mechanical alignment without machining custom external spacers or stopper blocks.
Provide adjustable physical endpoints for diverter arms or pushing mechanisms where the exact required travel distance is determined dynamically on-site.
Choose this 40mm bore when you need higher thrust than a 32mm cylinder (which provides 402N at 0.5MPa) but want a more compact footprint than a 50mm option (982N at 0.5MPa). The generous 75mm adjustment range is ideal for machines that undergo frequent product changeovers, allowing the retract distance to be modified on the fly rather than swapping out a fixed-stroke SAI cylinder. If your application requires the load to be held in place without continuous air pressure, you would need to step up to an AirTAC SAIL or BSAI locking cylinder instead of relying on this adjuster.
When replacing an ISO 15552 cylinder, ensure you match the 40mm bore, 260mm stroke, PT G1/4 port, and the required mounting style. SAIJ supports a specific subset of mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the stroke is 260mm, the M12x1.25 rod will experience leverage forces under side loading; an external guide mechanism is recommended to prevent premature seal wear and ensure smooth operation across the full travel window.
Quick checklist
It features a rear mechanical adjusting screw that allows you to shorten the effective stroke by up to 75mm. This creates a usable travel window of 185 to 260mm, letting you set the exact retract position at commissioning without changing the cylinder.
At 0.7MPa, the push force increases to 879N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.