
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X270-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 270mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X270-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits a usable travel window of 220 to 270 mm. The extruded aluminum barrel incorporates sensor grooves on both sides, allowing direct mounting of CMSE reed or DMSE electronic switches without extra brackets.
This model uses a standard carbon steel piston rod with an M12x1.25 thread and PT tapered ports. The external stopper at the rear allows precise end-position tuning at commissioning without swapping hardware. It is essential to note that this adjuster acts purely as a travel stop and does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X270-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-position from 220 to 270 mm during format changes without swapping cylinders or adding external mechanical stops.
Fine-tune the clamping travel at machine commissioning to accommodate varying part tolerances using the rear adjustment screw.
Provide adjustable pusher travel on a packaging line, allowing rapid reconfiguration for different carton sizes.
If your setup needs less force, stepping down to a 32 mm bore yields 402 N, while stepping up to a 50 mm bore provides 982 N. The adjustable stroke is ideal for product changeovers, enabling variable end-stops without machining new mounting plates, unlike a fixed-stroke SAI cylinder.
As a dimensionally interchangeable ISO 15552 profile cylinder, it matches standard mounting footprints using the Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting set. It omits FB, CA, CB, and CR options. Operating speed ranges from 30 to 800 mm/s. For this 270 mm stroke, ensure proper external guiding to prevent excessive side-loading on the M12x1.25 rod.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
The rear adjuster screw acts as an external mechanical stop, allowing you to shorten the effective travel from the nominal 270 mm down to 220 mm. It functions as a travel stop and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.