
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X275-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 275mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X275-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel window from 200 to 275 mm without swapping the unit. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
This adjustable-stroke model uses a PT tapered port thread and omits the FB, CA, CB, and CR mounting options, utilizing a reduced set of ISO 15552 interfaces including Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear adjuster acts purely as a mechanical stop for end-position tuning, meaning it does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X275-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 200-275 mm travel window during product size transitions to set new end positions without physically replacing the cylinder or adding external stops.
Fine-tune the retract end position during initial setup to absorb mechanical tolerances and achieve exact positioning before finalizing the machine cycle.
Adjust the stroke dynamically on packaging or conveying lines to handle different package lengths on the fly using the rear adjustment screw.
The 75 mm adjustment range lets you dial in the exact travel distance during commissioning, avoiding the need to add external stops or replace a fixed-stroke SAI cylinder. For applications requiring position holding without live air, consider the SAIL or BSAI series, as the SAIJ adjuster is a travel stop, not a lock.
Because this configuration features a 275 mm stroke, the 16 mm rod and M12x1.25 thread should be guided externally if the load imposes significant side loading. It provides direct dimensional interchangeability with other ISO 15552 cylinders, matching the 40 mm bore, 275 mm stroke, 75 mm adjustment, PT port, and -S magnet specifications.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the nominal 275 mm stroke by up to 75 mm, creating a usable travel window of 200 to 275 mm. It is a travel stop for end-position tuning, not a lock, and does not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.