verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-10

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X280-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke280 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$89.29 $96.79Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-10

The AirTAC SAIJ40X280-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear mechanical stopper that trims the stroke by up to 10 mm. This yields a 270-280 mm usable travel window, letting you dial in the exact retract end position during commissioning without swapping hardware.

Because the adjuster acts purely as a travel stop and not a lock, live air pressure is required to hold the load in place. For position holding without continuous air, consider an external pilot-operated check valve or the related SAIL lock cylinder. This extruded aluminum body uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB and CA/CB options.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-10 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X280-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke280 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-10

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×280Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-10 Is Used

tune

Machine Changeover

Fine-tune the 270-280 mm retract distance by up to 10 mm on the fly to accommodate slight variations in new product sizes without changing the cylinder.

precision_manufacturing

End-Stop Calibration

Dial in the exact end position during initial machine commissioning, absorbing mechanical tolerances by adjusting the rear stopper instead of adding shims.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-10 the Right Cylinder?

The 10 mm adjustment range is ideal for fine-tuning a 280 mm nominal stroke to match product changeovers on a line. To replace an ISO 15552 cylinder, match the 40 mm bore, 280 mm stroke, PT tapered port threads, and standard carbon steel rod. Since this unit lacks the -S magnet suffix, it will not trigger AirTAC CMSE or DMSE sensors.

With a 280 mm stroke, the 16 mm rod and M12x1.25 rod thread can handle moderate side loads, but an external guide rail is recommended for any heavy or off-center tooling attached to the end of the rod to prevent premature seal wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-10 FAQ

At 0.7 MPa, the push force increases to 879 N.

The rear adjuster acts as a mechanical stop that allows you to shorten the 280 mm nominal stroke by up to 10 mm, creating a 270-280 mm usable travel window. It sets the end position but does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X280-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.