
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X280-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X280-100-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. By turning the rear stopper screw, you unlock a wide 180-280mm usable travel window, allowing precise end-position tuning without swapping hardware.
Because this variant includes the -S magnet, it directly supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed within the dual-side extruded barrel grooves. The generous 100mm adjustment range is perfect for accommodating multiple product sizes on a single line, while the standard adjustable air cushions at both ends manage deceleration across the 30-800mm/s speed range.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point within the 180-280mm window during machine commissioning to accommodate different material lengths without adding external physical stops.
Quickly adjust the rear stroke screw by up to 100mm when switching the production line to a new package or part size, minimizing downtime between runs.
Leverage the built-in magnet with DMSE electronic sensors to confirm end-of-stroke positions dynamically as the adjustable travel window is modified for various tasks.
If your setup needs less force, stepping down to a 32mm bore yields 402N; if you need substantially more clamping or lifting power, stepping up to a 50mm bore provides 982N. The 100mm adjustment window here is far more versatile than a fixed SAI cylinder, enabling rapid machine changeovers.
When replacing an ISO 15552 cylinder, match the 40mm bore, 280mm stroke, PT G1/4 port, and the -S magnet requirement. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the total stroke is 280mm, ensure adequate external guiding to prevent excessive side-loading on the 16mm rod. Remember that the rear adjuster is a travel stop, not a lock; for load-holding without live air, select an SAIL or BSAI cylinder.
Quick checklist
If operated at 0.7 MPa, the push force increases to 879N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the nominal 280mm down to 180mm. This creates a highly flexible 180-280mm usable window for fine-tuning end positions without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.