
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X280-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X280-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers 628 Newtons of push force at 0.5 MPa and features a 10 mm adjustment range, creating a precise 270-280 mm usable travel window for fine-tuning the retract end position.
This -S variant includes a magnet for CMSE reed and DMSE electronic sensors, fitting neatly into the standard extruded aluminum barrel sensor grooves. It uses a G1/4 port with a PT tapered thread type and a 16 mm carbon steel rod. The mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 270-280 mm retract position precisely when switching between product sizes on a packaging line, using the rear screw instead of adding external shims.
Fine-tune the final resting position of a tooling head during commissioning to achieve perfect alignment without physically remounting the actuator.
Adjust the stroke length by up to 10 mm to alter a diverter arm's reach on a conveyor system, accommodating slightly different package widths on the fly.
The 10 mm rear adjuster allows precise end-position tuning during commissioning or product changeover without swapping the cylinder. For load-holding without live air pressure, note that this adjuster acts only as a travel stop; you would need an external rod lock or an AirTAC SAIL lock cylinder instead.
Because the 280 mm stroke is relatively long, ensure external guiding is used to prevent excessive side-loading on the 16 mm rod. To match this ISO 15552 replacement exactly, verify the 280 mm stroke, 10 mm adjustment, PT port thread, and the -S magnet requirement.
Quick checklist
At 0.5 MPa operating pressure, this 40 mm bore cylinder provides 628 Newtons of push force and 528 Newtons of pull force. At 0.7 MPa, the push force increases to 879 Newtons.
The rear adjuster acts as a mechanical stop that allows you to shorten the nominal 280 mm stroke by up to 10 mm, providing a usable travel window of 270-280 mm. It is a stop, not a lock, so the cylinder still requires live air to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.