
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X280-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X280-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 260-280 mm, allowing you to dial back the nominal 280 mm stroke by up to 20 mm during machine commissioning.
Unlike a fixed-stroke SAI cylinder, this model integrates an external stopper screw at the rear to fine-tune the retract end position without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. It uses a G1/4 port and a 16 mm carbon steel rod, which provides robust resistance to side loading, though long unsupported strokes still require an external guide.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 260-280 mm travel window during product size transitions without physically swapping out the cylinder.
Fine-tune the retract stop at commissioning to perfect the seating of parts, avoiding the need for external stopper blocks.
Accommodate varying package lengths on a conveyor line by adjusting the effective ejection stroke by up to 20 mm.
Choose this adjustable 40 mm bore cylinder when your application requires exact end-position tuning at setup or during product changeovers. Conversely, dropping to the 32 mm bore reduces the force to 402 N for lighter duties.
When selecting this ISO 15552 cylinder for a direct replacement, verify the 280 mm stroke, 20 mm adjustment range, PT tapered port thread, and mounting style. Available mountings include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider the SAIL or BSAI series. Because the stroke is 280 mm, ensure an external guide supports the load to prevent excessive rod side-loading.
Quick checklist
The rear adjuster screw acts as an external stopper that lets you shorten the effective travel from 280 mm down to a minimum of 260 mm. This allows for precise end-position tuning at commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.