
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X280-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X280-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 280 mm nominal travel by up to 30 mm for a usable window of 250 to 280 mm. The extruded aluminum barrel features sensor grooves on both sides for straightforward switch placement.
This model uses a 16 mm carbon steel rod with an M12x1.25 thread, paired with PT tapered port threading and a G1/4 air connection. The rear adjustment screw acts purely as a mechanical stop to fine-tune the retract position during commissioning; it does not lock the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 250 to 280 mm retract distance during product size changes without machining new hard stops.
Fine-tune the final resting position of tooling at commissioning using the rear adjuster screw.
Provide an adjustable physical stop for diverter arms or pushers that handle varying package sizes.
Select this 40 mm bore cylinder when an application requires precise end-position tuning without swapping out physical components, offering a distinct setup advantage over a fixed-stroke SAI cylinder. Because the 280 mm stroke is relatively long, ensure external guidance is used to prevent excessive side-loading on the 16 mm rod.
To match this ISO 15552 dimensionally interchangeable cylinder, confirm the 280 mm stroke, 30 mm adjustment range, PT port threads, and mounting choice from the available Basic, FA, LB, TC, FTC, TCM1, or TCM2 options. Note that FB, CA, CB, and CR mounts are omitted from this adjustable series. Since no magnet is specified, position sensing via CMSE or DMSE switches is not supported on this specific SKU.
Quick checklist
The rear adjuster screw lets you shorten the 280 mm nominal stroke by up to 30 mm, creating a usable travel window of 250 to 280 mm. The screw functions only as a travel stop and does not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.