
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X280-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X280-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 280 mm stroke that can be fine-tuned backward by up to 30 mm, yielding a precise 250-280 mm usable travel window. Delivering 628 N of pull force at 0.5 MPa, it fits perfectly into medium-duty setups requiring exact end-position calibration.
This variant includes a standard magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors, which seat neatly into the sensor grooves on both sides of the extruded aluminum barrel. It features a carbon steel rod and PT tapered port threads, while the rear adjuster acts strictly as a travel stop for commissioning flexibility rather than a load-holding lock.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 250-280 mm retract distance during format size changes without physically swapping the cylinder or repositioning hard stops.
Provides 628 N of pull force to actuate routing gates, with the 30 mm rear adjustment allowing precise tuning of the gate resting position.
Uses the integrated magnet with DMSE electronic sensors to confirm part seating, while the rear stop fine-tunes the clamp depth.
Choose this 40 mm bore when an application demands 628 N pull force at 0.5 MPa but does not require the heavier 982 N pull of a 50 mm bore. The adjustable 250-280 mm window is ideal for product changeovers, allowing you to dial in the exact retract distance without swapping cylinders or adding external stops. If your process requires the load to be held without live air pressure, pair this cylinder with an external rod lock or select an AirTAC SAIL or BSAI model.
Because the 280 mm stroke creates a longer unsupported rod extension, an external guide is recommended to prevent side-load wear on the seals. To match this ISO 15552 cylinder exactly, confirm the 40 mm bore, 280 mm stroke, 30 mm adjustment, PT G1/4 port, and the -S magnet. The compatible mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 30 mm, creating a 250-280 mm travel window. It functions as a physical stop to set the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.