
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X280-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X280-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 230 to 280 mm, allowing you to dial back the nominal 280 mm stroke by up to 50 mm.
Equipped with a 16 mm carbon steel rod and an M12x1.25 thread, this unit handles moderate side loads well, though the 280 mm stroke still benefits from an external guide to prevent rod binding. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is specified later. It uses a PT tapered G1/4 port and reaches speeds of 30 to 800 mm/s.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 230 to 280 mm end-stop for different product sizes on a packaging line without physically replacing the actuator.
Fine-tune the retract position during commissioning to compensate for mechanical tolerance stack-ups in the fixture.
Vary the ejection distance on an assembly press to safely clear parts of varying heights before returning to home.
Choose this 40 mm bore model when your setup requires precise end-position tuning during commissioning or product changeover without swapping cylinders. Conversely, downsizing to the 32 mm bore provides 402 N for lighter, space-constrained tasks.
The rear adjuster acts purely as a mechanical stop to decelerate the travel end; it does not hold the load without live air. For true fail-safe load holding, consider the SAIL pneumatic lock series or an external rod lock. To match this ISO 15552 replacement exactly, specify the 40 mm bore, 280 mm stroke, 50 mm adjustment, PT G1/4 port, and your preferred mounting bracket from the SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2. Because the stroke is 280 mm, ensure proper external guidance to manage side-load stresses.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
The rear adjuster screw lets you mechanically shorten the effective travel from the nominal 280 mm down to 230 mm. This creates a 50 mm adjustable window for fine-tuning the retract end position at commissioning, but it functions only as a stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.