
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X280-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel rod and a PT tapered port. Because this specific SKU carries a 50mm adjustment code, you can dial the effective travel back from its 280mm nominal length, creating a precise 230-280mm usable window. This allows you to fine-tune the retract end-position at commissioning without swapping the cylinder or adding external stops.
This extruded aluminum profile cylinder includes a magnet (-S) for position sensing and operates at speeds between 30-800 mm/s. It supports AirTAC CMSE reed and DMSE electronic solid-state switches fitted into the sensor grooves on both sides. The rear adjuster acts purely as a travel stop for deceleration and is not a lock, meaning the cylinder cannot hold a load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 230-280mm travel window during format size changes on a packaging line, using the rear screw to set the exact retract distance without changing hardware.
Fine-tune the end position at commissioning to perfectly seat a 628N load, eliminating the need to bolt on physical external stops.
Adjust the retract depth on the fly for automated assembly tooling, accommodating different part heights using the 50mm adjustment range.
The adjustable stroke is selected over a fixed SAI cylinder when a machine requires variable end-stops or product-size changeovers. For load-holding without live pressure, integrate an external pilot-operated check valve or select the SAIL or BSAI series instead. To match this ISO 15552 cylinder, confirm the 40mm bore, 280mm stroke, 50mm adjuster, PT port, and -S magnet.
Because the 280mm stroke is moderately long, the 16mm rod and M12x1.25 rod thread provide rigidity, but an external guide is still recommended to prevent excessive side-loading on the unsupported extension.
Quick checklist
It operates at a speed range of 30-800 mm/s.
The rear adjuster screw lets you trim the nominal 280mm stroke back by up to 50mm, creating a usable travel window of 230-280mm. It acts as a mechanical stop to set the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.