
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X280-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X280-75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The integrated -S magnet allows for direct mounting of CMSE reed and DMSE electronic solid-state sensors along the dual-side barrel grooves for precise end-position detection.
This model provides a usable travel window of 205 to 280 mm via its 75 mm adjustment range. This wide tuning band is ideal for product changeovers, allowing you to dial in the exact end-stop without swapping the cylinder or adding external stops. The extruded aluminum barrel design ensures it is dimensionally interchangeable with ISO 15552 cylinders such as the Festo DSBC and SMC C95, while utilizing a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the end-stop from 205 to 280 mm during format changes without disassembling the machine or swapping cylinders.
Fine-tune the retract position at commissioning to perfect the seating of parts, eliminating the need for external stopper blocks.
Adjust the travel window on the fly for packaging lines handling multiple package lengths.
Choose this adjustable-stroke unit when your machine setup requires variable end-stops or fine-tuning at commissioning, rather than relying on a fixed-stroke SAI cylinder. If your application needs less force, stepping down to a 32 mm bore yields 563N at 0.7 MPa; for higher loads, a 50 mm bore provides 1374N. The 16 mm carbon steel rod and M12x1.25 thread offer robust load handling, but at 280 mm of stroke, you should use an external guide to prevent side-loading damage.
For a direct ISO 15552 replacement, match the 40 mm bore, 280 mm stroke, 75 mm adjustment, PT tapered port thread, and the -S magnet requirement. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure. For true load-holding without continuous air, consider the SAIL or BSAI series instead.
Quick checklist
The rear adjusting screw acts as an external stopper that shortens the effective stroke by up to 75 mm. For this 280 mm stroke model, it provides a usable travel window of 205 to 280 mm. Note that this adjuster is a stop, not a lock; it does not hold the load without live air pressure.
The maximum push force reaches 1130N at 0.9 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.