verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-100

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X290-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 290mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke290 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$89.29 $96.79Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-100

The AirTAC SAIJ40X290-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 190-290 mm usable travel window from its 290 mm nominal stroke. The extruded aluminum barrel includes sensor grooves on both sides for straightforward position feedback.

This variant uses a PT tapered port thread and a carbon steel piston rod. The rear adjuster functions strictly as a travel stop for end-position tuning during commissioning; it does not lock the load without live air pressure. For load-holding requirements, an external pilot-operated check valve or related SAIL lock series is required.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-100 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X290-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke290 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-100

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×290Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-100 Is Used

settings_input_component

Variable End-Stop Tuning

Dial in the exact 190 to 290 mm travel distance during machine commissioning to perfect positioning without machining external stopper blocks.

conveyor_belt

Product Size Changeover

Quickly adapt a packaging line to different carton lengths by adjusting the rear screw up to 100 mm rather than replacing the entire cylinder.

precision_manufacturing

Stroke Fine-Tuning

Trim the effective stroke to avoid mechanical interference at the end of travel, protecting tooling and optimizing the machine cycle.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-100 the Right Cylinder?

The 100 mm adjustment range is ideal for product-size changeovers on a line. If your setup needs less force, stepping down to a 32 mm bore yields 402 N, while a 50 mm bore offers 982 N for heavier loads.

Because the 290 mm stroke is substantial, the 16 mm carbon steel rod and M12x1.25 rod thread will still experience leverage forces under side-loading; always guide the load externally to prevent rod binding. To match this ISO 15552 replacement exactly, specify the 40 mm bore, 290 mm stroke, 100 mm adjustment, PT G1/4 port, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-100 FAQ

At 0.7 MPa the push force increases to 879 N. The operational speed range is 30-800 mm/s.

The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the 290 mm nominal stroke down to 190 mm. It is used for fine-tuning end positions at commissioning but does not hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X290-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.