
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X290-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 290mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X290-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 290 mm stroke that can be fine-tuned backward by up to 20 mm, creating a precise 270-290 mm usable travel window.
The rear adjustment screw acts purely as a mechanical stop for end-position tuning during commissioning. It is not a locking mechanism, so the cylinder cannot hold loads without live air pressure. The extruded aluminum barrel incorporates sensor grooves on both sides, and the mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 270-290 mm end-stop position during initial commissioning to perfect a pressing or forming operation without adding external spacers.
Quickly adjust the rear stopper by up to 20 mm to accommodate a slightly shorter material length on a modified production line.
Fine-tune the retraction point of a diverter or sorting mechanism on a conveyor system to handle varying package dimensions.
If your application demands less force, the 32 mm bore offers 402 N; if you need more power, the 50 mm bore provides 982 N. Because the 290 mm stroke is relatively long, ensure you use an external guide to support the load and prevent excessive side-load wear on the 16 mm rod.
Select an adjustable-stroke SAIJ over a fixed SAI when you need to dial in the exact end position during machine setup or product changeover without swapping the entire cylinder. For ISO 15552 replacement matching, verify the 40 mm bore, 290 mm stroke, 20 mm adjustment, PT port, and standard carbon steel rod. If your process requires holding a load without continuous air pressure, consider the SAIL or BSAI locking cylinder series instead.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 128 kgf.
The rear adjuster screw allows you to shorten the effective travel from the 290 mm nominal stroke down to a minimum of 270 mm. This mechanical stop fine-tunes the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.