
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X290-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 290mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X290-30 is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, delivering 879 Newtons of push force at 0.7 MPa. A tapered PT G1/4 port and a 16 mm carbon steel rod come standard. By turning the external rear screw, you can trim the effective travel back by up to 30 mm, creating a 260-290 mm usable window. This allows precise end-position tuning during commissioning without adding external stops.
This extruded aluminum profile barrel features sensor grooves on both sides for CMSE reed or DMSE electronic switches. The rear adjuster functions strictly as a travel stop to set deceleration alongside the built-in air cushions; it does not hold the load without live air. For load-holding requirements without continuous pressure, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial the rear stopper back by up to 30 mm when switching a packaging line to a different carton size, avoiding physical cylinder swaps.
Fine-tune the final retracted position within the 260-290 mm window during commissioning to perfect a pressing or clamping operation.
Adjust the stroke length on a diverter arm to handle varying product lengths on a single conveyor belt without adding external mechanical stops.
Select this 40 mm bore when you need more force than the 32 mm option (402 N at 0.5 MPa) but want to avoid the larger 50 mm footprint (982 N at 0.5 MPa). The adjustable stroke is chosen over a fixed SAI cylinder when a machine requires variable end-stops or frequent product-size changeovers, letting you dial in the exact 260-290 mm travel on the fly.
For an exact ISO 15552 replacement, match the 40 mm bore, 290 mm stroke, 30 mm adjustment, PT G1/4 port, and standard carbon steel rod. Because the 290 mm stroke is relatively long, ensure your setup includes an external guide to handle side loads, as even the 16 mm rod with an M12x1.25 thread has limits on unsupported lengths. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.7 MPa operating pressure, this 40 mm bore cylinder provides 879 Newtons of push force and 528 Newtons of pull force.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 290 mm nominal stroke by up to 30 mm, providing a usable travel window of 260 to 290 mm. It sets the end position but does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.