
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X290-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 290mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X290-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal travel of 290 mm with an adjustable window of 250 to 290 mm, allowing you to dial back the retract position by up to 40 mm during commissioning.
This model features a 16 mm carbon steel rod with an M12x1.25 thread, offering robust resistance to side loads, though the 290 mm stroke still benefits from an external guide for optimal alignment. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches if a magnet is added later. It uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the retract end position by up to 40 mm on packaging lines when switching between different product lengths.
Dial in the exact 250 to 290 mm travel window during setup without adding external stopper blocks or machining new mounting plates.
Adjust the stroke dynamically on diverter gates to accommodate varying package sizes on the fly without replacing the cylinder.
Select this 40 mm bore unit when your assembly requires variable end stops or product-size changeovers without physically swapping the cylinder. If your application needs less thrust, stepping down to a 32 mm bore yields 402 N at 0.5 MPa; for heavier loads, a 50 mm bore provides 982 N. Because the 290 mm stroke is relatively long, ensure you use an external guide to prevent rod deflection and premature seal wear.
The rear adjuster acts purely as a mechanical stop to set the travel end and relies on the integrated air cushion for deceleration. It does not hold the load without live air pressure. For applications requiring true load-holding in the event of air loss, consider the AirTAC SAIL or BSAI series instead. This cylinder is dimensionally interchangeable per ISO 15552, uses PT tapered port threads, and operates effectively at speeds from 30 to 800 mm/s.
Quick checklist
At the maximum pressure of 1.0 MPa, it can deliver up to 128 kgf.
The rear adjuster screw allows you to shorten the effective stroke from its nominal 290 mm down to 250 mm. This provides a 40 mm tuning window to set the exact retract end position without modifying the cylinder's physical mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.