
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X290-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 290mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X290-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides, and this -S variant includes a magnet for direct compatibility with AirTAC CMSE reed and DMSE electronic solid-state switches.
This model uses a G1/4 port and a 16 mm carbon steel rod with an M12x1.25 thread. The rear adjuster acts purely as a mechanical stop to fine-tune the retract position without needing external stops; it does not lock the load without live air. For load-holding requirements without continuous air pressure, consider an external pilot-operated check valve or the SAIL lock cylinder series.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 250-290 mm retract position when switching between product sizes on a packaging line, eliminating the need to physically swap out cylinders.
Dial in the exact end-of-stroke position during machine commissioning using the rear screw, ensuring precise mechanical positioning without adding external stopper blocks.
Adjust the actuation distance of sorting deflectors on the fly to accommodate different package widths, maintaining accurate routing without machine downtime.
The adjustable 250-290 mm stroke is ideal for product changeovers on a line, letting you dial in the exact retract end-position without swapping the cylinder. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Because this cylinder has a 290 mm stroke, the 16 mm rod requires external guidance to prevent excessive side-loading on the seals. To match this exact ISO 15552 replacement, specify: 40 mm bore, 290 mm stroke, 40 mm adjustment, PT tapered port threads, carbon steel rod, and the -S magnet option.
Quick checklist
At 0.7 MPa, the push force increases to 879 N. The maximum thrust is 128 kgf at 1.0 MPa.
The rear adjuster screw allows you to shorten the 290 mm nominal stroke by up to 40 mm, creating a 250-290 mm usable travel window. It acts as a mechanical stop to set the end position and is not a lock, so the cylinder requires live air to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.