
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X30-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 30mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X30-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 30 mm nominal travel by up to 10 mm for a highly precise 20-30 mm usable window. The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement.
This model utilizes a standard carbon steel piston rod with an M12x1.25 thread and a G1/4 port. The rear adjuster functions strictly as a travel stop for commissioning fine-tunes and product changeovers, meaning it does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI variants.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X30-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact clamping depth within the 20-30 mm travel window during machine commissioning, avoiding the need to physically swap cylinders for minor positional corrections.
Quickly adjust the rear stopper by up to 10 mm to accommodate slight variations in incoming part sizes on a high-mix assembly line without changing tooling.
The 10 mm adjustment window is specifically valuable for machine setups requiring variable end-stops, eliminating the need to swap out a fixed-stroke SAI cylinder during minor product size changes. As an ISO 15552 dimensionally interchangeable cylinder, ensure your replacement matches the 40 mm bore, 30 mm stroke, PT tapered port thread, and desired mounting from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Because the adjuster and integrated air cushions only decelerate the travel end, never rely on them as a locking brake. If your application demands position holding without live air pressure, pilot-operated check valves or external rod locks are required.
Quick checklist
The rear adjuster acts as a mechanical stop that allows you to shorten the 30 mm nominal stroke by up to 10 mm, creating a 20-30 mm usable travel window. It is designed for fine-tuning end positions at commissioning and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.