
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X30-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 30mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X30-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because it carries the -S option, it includes a magnet for position sensing and works directly with AirTAC CMSE reed and DMSE electronic solid-state switches mounted into the dual-side sensor grooves.
This adjustable-stroke variant allows you to dial back the 30mm nominal stroke by up to 10mm, creating a precise 20-30mm usable travel window. The rear stopper screw lets you fine-tune the retract end position at commissioning without adding external stops or swapping the cylinder. The adjuster acts purely as a mechanical travel stop and does not lock or hold the load without live air pressure; for true load-holding without continuous air, consider the SAIL or BSAI series.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X30-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 20-30mm retract position during initial commissioning without machining custom external stoppers.
Quickly adapt the end-stop distance on a packaging line when switching to a slightly different product size.
Use the rear adjuster screw to set a highly repeatable retracted position for delicate assembly operations.
The adjustable 20-30mm travel window is ideal for applications requiring exact end-position tuning during machine setup or product changeover, rather than committing to a fixed-stroke standard SAI cylinder.
As a dimensionally interchangeable ISO 15552 profile cylinder, it uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR mounts. Because the 16mm rod and M12x1.25 thread handle moderate side loads well, and the stroke is very short, no external guide rail is strictly required for standard loads. Remember that the rear adjuster only sets the travel end and decelerates the load via the 30mm variable air cushion; it is not a brake.
Quick checklist
The rear adjuster screw acts as a mechanical stop that can trim the 30mm nominal stroke back by up to 10mm, giving you an adjustable 20-30mm travel window. It sets the end position but does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.