
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X30-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 30mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X30-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. Because the nominal 30 mm stroke can be dialed back by up to 20 mm, it yields a highly specific 10 to 30 mm usable travel window for precise end-position tuning at commissioning.
This 40 mm bore unit uses a PT tapered G1/4 port and a 16 mm carbon steel rod with an M12x1.25 thread, providing solid resistance to side loads. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. It supports the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and relies on variable air cushions at both ends for end-of-stroke deceleration.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X30-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 10 to 30 mm travel window during machine commissioning to perfect the seating pressure of delicate components without needing custom spacers.
Quickly adjust the retract end-position on an assembly line when switching to a different product size, using the rear screw rather than replacing the entire actuator.
Choose this adjustable model over a fixed SAI when a machine setup requires variable end stops or frequent product-size changeovers without physically swapping the cylinder or bolting on external stops. If your application needs less push force, stepping down to a 32 mm bore yields 402 N at 0.5 MPa; if you need more clamping power, stepping up to a 50 mm bore provides 982 N. The rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure. For true load-holding without continuous air, consider an SAIL or BSAI variant instead. To match this exact configuration for an ISO 15552 replacement, specify a 40 mm bore, 30 mm stroke, 20 mm adjustment, PT G1/4 port, and no magnet.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 879 N.
The rear adjuster screw allows you to shorten the effective travel from its nominal 30 mm down to as little as 10 mm, creating a 10 to 30 mm usable travel window. This stopper only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.