
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X30-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 30mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X30-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear mechanical stroke adjuster. It features a 30 mm nominal stroke that can be dialed back by up to 20 mm, yielding a highly precise 10 to 30 mm usable travel window. This on-board adjuster allows for exact end-position tuning at commissioning without adding external stops.
This SKU includes a standard carbon steel rod and a -S magnet for position sensing. The extruded aluminum barrel incorporates sensor grooves on both sides, accepting AirTAC CMSE reed and DMSE electronic solid-state switches. It uses PT tapered port threads (G1/4) and offers a reduced SAIJ mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X30-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly fine-tune the 10-30 mm travel window during product size transitions on a packaging line without physically swapping cylinders or adding external mechanical stops.
Dial in the exact clamping position for varying part thicknesses, using the rear stopper to set the precise 40 mm bore thrust endpoint at commissioning.
The adjustable stroke is ideal for machine changeovers where the precise end-stop varies slightly between product sizes, replacing the need for a fixed-stroke SAI cylinder.
For ISO 15552 replacement, match the 40 mm bore, 30 mm stroke, 20 mm adjustment range, PT port threads, and -S magnet. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series. Because the stroke is short, side-load risks are minimal, but ensure the M12x1.25 rod thread is properly aligned to prevent binding.
Quick checklist
The rear adjuster is a mechanical stopper that lets you shorten the 30 mm nominal stroke by up to 20 mm. This creates a usable travel window of 10 to 30 mm, allowing you to fine-tune the end position without changing the cylinder itself.
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf of thrust.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.