
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X30-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 30mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X30-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that provides a 0 to 30 mm usable travel window. The PT tapered port size is G1/4, and the unit integrates variable air cushions at both ends to decelerate the piston smoothly.
This adjustable model omits the FB, CA, CB, and CR mounts, offering a reduced interface set including Basic, FA, LB, TC, FTC, TCM1, and TCM2. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to add CMSE reed or DMSE electronic sensors later if position verification is required.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X30-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 0 to 30 mm retract position during product size changes without physically replacing the cylinder.
Fine-tune the final end-of-stroke position during commissioning to perfect the timing of a packaging or assembly pick.
Provide adjustable clamping force and travel for delicate workholding tasks requiring precise short-stroke positioning.
Choose this 40 mm bore when a 32 mm bore (offering 402 N at 0.5 MPa) lacks sufficient thrust, but a 50 mm bore (982 N) would be excessive overkill. An adjustable stroke is ideal for machine setup and changeover, letting you fine-tune the retract end-position at commissioning without swapping cylinders or adding external stops. Note that the rear adjuster functions only as a travel stop and does not hold the load without live air; for true position holding, consider the SAIL or BSAI series. This model is dimensionally interchangeable per ISO 15552 mounting dimensions.
Quick checklist
If you increase the operating pressure to 0.7 MPa, the push force rises to 879 N.
A rear external adjusting screw acts as a mechanical stopper, allowing you to trim the effective 30 mm stroke back by up to 30 mm, yielding a 0 to 30 mm usable travel window.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.