verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X30-30S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X30-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 30mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke30 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$68.62 $76.12Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X30-30S

The AirTAC SAIJ40X30-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 0 to 30 mm for exact end-position tuning. The integrated magnet (-S) enables direct position feedback using AirTAC CMSE reed or DMSE electronic sensors housed within the dual-side extruded barrel grooves.

This adjustable-stroke design allows you to dial in the exact retract distance during commissioning without swapping hardware or adding external stops. The rear mechanism acts purely as a travel stop to set the deceleration point alongside the standard air cushions, meaning it will not hold a load without continuous live air pressure.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X30-30S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X30-30S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke30 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X30-30S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×30Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X30-30S Is Used

settings_input_component

Machine Changeover

Dial in the exact 0-30mm retract distance during product size transitions without physically swapping the cylinder or adding external stopper blocks.

precision_manufacturing

End-Position Tuning

Fine-tune the final resting position of tooling at commissioning using the rear screw, ensuring precise alignment before locking down the setup.

factory

Variable End Stops

Adapt clamping or ejecting strokes on the fly for short-run components, relying on the rear stopper to set the travel limit rather than fixed mechanical spacers.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X30-30S the Right Cylinder?

The adjustable 0-30mm window is ideal for product-size changeovers on a line, offering far more setup flexibility than a fixed SAI cylinder. For load-holding without live pressure, consider an external rod lock or pilot-operated check valve, as the SAIJ adjuster is a stop, not a brake. To match this ISO 15552 footprint exactly, specify the 40mm bore, 30mm stroke, 30mm adjustment, PT ports, and the -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X30-30S FAQ

It operates efficiently at speeds between 30 and 800 mm/s.

The rear adjuster allows you to trim the effective travel anywhere within a 0 to 30mm window from the nominal stroke. It functions as a mechanical stop to set the end position and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X30-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X30-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.