
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X300-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 300mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X300-40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The built-in rear stopper allows you to dial back the 300mm nominal stroke by up to 40mm, creating a precise 260-300mm usable travel window for exact end-position tuning during commissioning.
This adjustable unit includes a magnet for use with CMSE reed and DMSE electronic sensors, fitting directly into the dual-side extruded barrel grooves. Because the 300mm stroke is relatively long for a 40mm bore, the 16mm carbon steel rod and M12x1.25 thread will carry side loads better than smaller variants, though an external guide is still recommended for unsupported loads. The rear adjuster acts purely as a travel stop for deceleration alongside the air cushions, not as a lock, and the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X300-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 260-300mm travel window during product line changeovers to accommodate different part lengths without physically swapping cylinders.
Dial in the exact retract position of a diverter or gating mechanism on a conveyor by adjusting the rear stopper up to 40mm during commissioning.
Leverage the integrated -S magnet and dual sensor grooves to mount CMSE or DMSE switches for precise position feedback alongside the adjustable stroke.
If your process demands less force, stepping down to a 32mm bore yields 402N at 0.5 MPa; if you need significantly more clamping power, a 50mm bore provides 982N. Choose this adjustable-stroke SAIJ over a fixed SAI when you need to trim the end-of-stroke position by up to 40mm during machine setup or product changeover without swapping the cylinder or adding external stops.
For an exact ISO 15552 replacement, match the 40mm bore, 300mm stroke, 40mm adjustment code, PT tapered port threads, and the -S magnet requirement. Since the stroke is 300mm or longer, ensure proper external guiding to prevent rod side-loading damage. Remember that the rear adjuster and air cushions do not hold the load without live air; for true load-holding without pressure, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force rises to 879N.
The rear adjusting screw acts as a mechanical stop that lets you shorten the effective stroke by up to 40mm. This creates a usable travel window of 260-300mm, allowing you to fine-tune the end position at commissioning without changing the cylinder or adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.