
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X325-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 325mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X325-20-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear mechanical stroke adjuster. By turning the integrated stopper screw, you can trim the nominal 325 mm travel back by up to 20 mm, creating a precise 305-325 mm usable end-position window without adding external stops.
This variant includes a standard magnet for position sensing via AirTAC CMSE reed or DMSE solid-state switches mounted in the dual-side sensor grooves. The extruded aluminum barrel design uses a G1/4 port and a 16 mm carbon steel rod with an M12x1.25 thread. Because the adjuster acts solely as a travel stop and the air cushions manage deceleration, neither holds the load without live air pressure—use a SAIL or BSAI cylinder if fail-safe locking is required.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X325-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 305-325 mm stroke window during product size transitions to set exact end positions without swapping physical cylinders.
Fine-tune the ejection reach at commissioning to accommodate varying package sizes on a moving line.
Use the rear adjusting screw to precisely set the retract end-position for critical clamping or forming operations.
Selecting this 40 mm bore over a 32 mm version upgrades your thrust from 402 N to 628 N at 0.5 MPa, while stepping up to a 50 mm bore yields 982 N. The adjustable stroke is ideal for machine setups requiring fine-tuning during commissioning or product changeovers, replacing the need to swap out a fixed-stroke SAI cylinder. To match this ISO 15552 replacement, specify the 40 mm bore, 325 mm stroke, 20 mm adjustment, PT tapered port threads, and the -S magnet option.
With a 325 mm stroke, the 16 mm rod is highly susceptible to side loads. An external guide rail should be used to prevent binding and premature seal wear over extended travel. The mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 configurations, omitting FB, CA, CB, and CR brackets.
Quick checklist
At 0.9 MPa, the push force increases to 1130 N.
The rear adjuster screw acts as a mechanical stop that allows you to shorten the 325 mm nominal stroke by up to 20 mm, providing a usable travel window of 305 to 325 mm. It is a stop, not a lock, and requires live air to hold position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.