
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X325-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 325mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X325-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers 628 Newtons of push force at 0.5 MPa and features a 325 mm nominal stroke that can be fine-tuned down by up to 30 mm, yielding a precise 295-325 mm usable travel window. This integrated adjustability allows you to dial in the retract end position during commissioning without swapping hardware.
Fitted with a PT tapered port and a 16 mm carbon steel rod, this unit includes a -S magnet for switch sensing. The extruded aluminum barrel accommodates AirTAC CMSE reed and DMSE electronic sensors along its dual grooves. The rear stopper acts strictly as a travel limit for deceleration, not a load-holding lock; true position holding without live air requires a SAIL or BSAI variant.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X325-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 295-325 mm travel window during product size changes without physically replacing the cylinder or adding external shims.
Fine-tune the retract position of sorting gates on a conveyor line to accommodate varying package lengths on the fly.
Precisely set the retract end position during initial machine commissioning to perfect timing and avoid hard mechanical crashes.
Select this 40 mm bore when an application requires 628 Newtons of push thrust at 0.5 MPa, but demands on-site end-position tuning. The 30 mm adjustment window is perfect for product changeovers, replacing the need to bolt on external stops or order a custom fixed-stroke SAI cylinder. If your setup needs less force, the 32 mm bore provides 402 Newtons; if more clamping power is required, stepping up to the 50 mm bore yields 982 Newtons.
Because the 325 mm stroke is relatively long, the 16 mm rod should be paired with an external guide to prevent excessive side-loading and premature seal wear. To match this exact ISO 15552 footprint for a direct replacement, verify the 325 mm stroke, 30 mm adjuster, PT port thread, and the -S magnet option. Mounting choices span Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.5 MPa operating pressure, this 40 mm bore cylinder generates 628 Newtons of push force and 528 Newtons of pull force. At 0.7 MPa, the push force increases to 879 Newtons.
The rear adjuster screw lets you shorten the 325 mm nominal stroke by up to 30 mm, creating a 295-325 mm usable travel window. This stopper limits the travel end for deceleration but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.