
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X325-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 325mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X325-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. Because this SKU carries a 75mm adjustment code, you can trim the effective travel anywhere within a 250-325mm window. This fine-tuning happens at the rear stopper without swapping the cylinder or adding external stops.
The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR. The rear adjuster acts purely as a travel stop to set deceleration, not as a lock, meaning it will not hold a load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X325-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 250-325mm travel window during format size changes on a packaging line without physically swapping actuators.
Fine-tune the retract end-position during machine commissioning to prevent over-travel and ensure precise tooling alignment.
Adjust the pusher stroke on the fly for different package lengths moving through a sorting conveyor system.
The 75mm adjustment range is ideal for production lines running variable product sizes, allowing rapid end-position changes during commissioning without replacing the actuator. If your application requires true load-holding without continuous air pressure, a plain SAIJ is insufficient; you should look at the SAIL (air-released lock) or BSAI (clamp-lock) variants instead.
When specifying a replacement, verify the 325mm stroke, 75mm adjustment, G1/4 PT port, and the required mounting bracket. Because the stroke is 325mm, the 16mm rod is subject to increased side-loading leverage; for long unsupported strokes, always use an external guide rail to prevent premature seal wear.
Quick checklist
At 0.5 MPa, the push force is 628N.
The rear adjuster acts as a mechanical stop that lets you shorten the 325mm nominal stroke by up to 75mm, creating a usable travel window of 250-325mm. It sets the end position but does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.