verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X35-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 35mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke35 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$65.83 $73.33Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10

The AirTAC SAIJ40X35-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster, designed to fine-tune end positions without external stops. It provides a usable travel window of 25-35 mm by trimming up to 10 mm off the 35 mm nominal stroke.

This variant uses a standard carbon steel piston rod and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. The rear adjuster acts solely as a travel stop for deceleration, not a load-holding lock.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X35-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke35 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×35Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10 Is Used

precision_manufacturing

Machine Setup Calibration

Dial in the exact retraction point during initial machine commissioning, trimming up to 10 mm to align fixtures perfectly without machining custom spacers.

conveyor_belt

Product Size Changeover

Quickly adapt a diverter arm's stroke window from 35 mm down to 25 mm when running a new product size on the packaging line.

tune

End-Stop Fine Tuning

Compensate for mechanical wear or slight fixture deviations by adjusting the rear stopper screw rather than reprogramming the entire machine cycle.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10 the Right Cylinder?

Choose this 40 mm bore adjustable-stroke cylinder when your application requires exact end-position tuning during commissioning or product changeover, avoiding the need to physically swap a fixed-stroke SAI cylinder.

Because the stroke is under 300 mm, side-load stress on the 16 mm rod is minimal, though long unsupported loads still require an external guide. To match this ISO 15552 dimensionally interchangeable cylinder, specify: 40 mm bore, 35 mm stroke, 10 mm adjustment, PT G1/4 port, and mounting from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Remember that without live air pressure, this cylinder will not hold its load—use an external rod lock or SAIL cylinder for fail-safe holding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10 FAQ

The rear adjuster screw lets you mechanically shorten the 35 mm nominal stroke by up to 10 mm, creating a usable travel window of 25-35 mm. This allows you to set the exact end position at the retract end without adding external stops.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X35-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.