verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X35-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 35mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke35 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$68.62 $76.12Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10S

The AirTAC SAIJ40X35-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 25 to 35 mm, allowing you to dial back the 35 mm nominal stroke by up to 10 mm during commissioning.

This variant includes a standard carbon steel piston rod and PT tapered port threads. The integrated magnet (-S) supports position sensing using AirTAC CMSE reed or DMSE electronic switches fitted into the dual-side sensor grooves. It uses the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits heavy tie-rod construction.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X35-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke35 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×35Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10S Is Used

tune

Product Changeover

Dial in the 25-35 mm stroke window on the fly when switching between slightly different product sizes on the same conveyor line.

precision_manufacturing

End-Stop Tuning

Fine-tune the retract end-position during machine commissioning without swapping the cylinder or adding external stopper blocks.

settings_input_component

Sensor Feedback

Use the built-in magnet with DMSE electronic sensors to confirm exact positioning within the short adjustable travel range.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10S the Right Cylinder?

If you need less force, the 32 mm bore offers 402 N; if your load is heavier, the 50 mm bore provides 982 N. The rear adjuster acts purely as a travel stop to fine-tune the 25-35 mm window without external blocks. It does not hold the load without live air pressure—use a SAIL or BSAI cylinder for locking needs. For exact ISO 15552 replacement, match the 40 mm bore, 35 mm stroke, 10 mm adjustment, PT ports, and -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10S FAQ

The rear adjusting screw acts as a mechanical stop that lets you shorten the 35 mm nominal stroke by up to 10 mm, creating a 25 to 35 mm usable travel window. It only sets the end position and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X35-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.