verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-20

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X35-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 35mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke35 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$65.83 $73.33Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-20

The AirTAC SAIJ40X35-20 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By incorporating a 20mm adjustment mechanism on a 35mm nominal stroke, this model provides a highly versatile 15-35mm usable travel window for exact positioning.

The integrated rear screw acts as a mechanical stop to fine-tune the retract end position during commissioning without adding external stops. This extruded aluminum profile cylinder utilizes PT tapered G1/4 ports and includes variable air cushions at both ends. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR options.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-20 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X35-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke35 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-20

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×35Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-20 Is Used

tune

Precision End-Stop Tuning

Dial in the exact retract position within the 15-35mm window during machine commissioning without swapping out the entire cylinder.

settings_input_component

Product Changeover

Quickly adjust the stroke end by up to 20mm on the fly to accommodate varying product sizes on a single production line.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-20 the Right Cylinder?

An adjustable stroke is chosen over a fixed SAI cylinder when machine setups demand variable end-stops or product changeovers require on-the-fly repositioning. To match this exact unit for an ISO 15552 replacement, specify: 40mm bore, 35mm stroke, 20mm adjustment, PT G1/4 port, and no magnet.

Because the nominal stroke is under 300mm, external side-load guides are less critical than on longer strokes, though the 16mm rod still handles moderate loads. Remember that the rear adjuster functions strictly as a travel stop and does not hold the load without live air; for dead-air load holding, consider an AirTAC SAIL or BSAI cylinder instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-20 FAQ

At 0.7 MPa, the push force increases to 879N.

The rear adjuster screw acts as a mechanical stop that lets you trim the effective travel back by up to 20mm, creating a usable stroke window of 15-35mm. It only sets the travel end and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X35-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.