
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X35-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 35mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X35-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 40mm bore and a 35mm nominal stroke, yielding a usable travel window of 15-35mm. This built-in adjustment capability allows you to fine-tune the retract end-position at commissioning without swapping hardware or adding external stops.
This variant includes a magnet for position sensing and uses a carbon steel rod with PT tapered port threads. The extruded aluminum barrel incorporates sensor grooves on both sides, supporting AirTAC CMSE reed and DMSE electronic solid-state switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 15-35mm window during machine commissioning without machining new spacers.
Quickly adjust the stroke by up to 20mm on a packaging line when switching between different product sizes.
Securely clamp delicate components using a precisely set travel limit, preventing over-travel damage.
If your application requires less force, the 32mm bore provides 402N; for heavier loads, the 50mm bore offers 982N. The rear adjuster acts purely as a travel stop and does not hold the load without live air—use a SAIL or BSAI cylinder for pneumatic locking. For ISO 15552 replacement matching, specify the 40mm bore, 35mm stroke, 20mm adjustment, PT port thread, and the -S magnet option.
Because the 16mm rod and M12x1.25 thread provide moderate side-load capacity, ensure external guidance is used if lateral forces are present. The variable air cushions at both ends decelerate the load, but they do not function as a brake.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw allows you to trim the effective stroke by up to 20mm. With the 35mm nominal stroke, this creates an adjustable travel window of 15-35mm, letting you set the exact end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.