verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-30

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X35-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 35mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke35 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$65.83 $73.33Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-30

The AirTAC SAIJ40X35-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the external rear screw, you can shorten the effective stroke, creating a highly precise 5 to 35 mm usable travel window without adding external stops.

This adjustment capability is perfect for fine-tuning end positions during machine commissioning or product changeovers. Unlike a fixed-stroke SAI cylinder, the SAIJ rear stopper acts purely as a travel limiter and does not hold the load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is specified later.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-30 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X35-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke35 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-30

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×35Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-30 Is Used

tune

Machine Setup Tuning

Dial in the exact 5 to 35 mm end position during initial machine commissioning without swapping out the entire cylinder.

settings_input_component

Product Changeover

Quickly adjust the travel stop on the rear screw when running a new product size through the assembly line.

precision_manufacturing

Precision End Stops

Use the rear mechanical stopper to consistently limit the stroke window, ensuring repeatable positioning at the retract end.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-30 the Right Cylinder?

The 30 mm adjustment range on a 35 mm nominal stroke is selected when exact end-of-travel positioning is critical and must be dialed in on-site, rather than relying on a fixed stop.

When replacing an ISO 15552 cylinder, match the 40 mm bore, 35 mm stroke, PT port thread, and the chosen mounting option from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that FB, CA, CB, and CR mounts are omitted from this adjustable series. Because the stroke is under 300 mm, side-load stress is minimal, but always ensure the M12x1.25 rod thread is properly aligned to avoid binding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-30 FAQ

At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.

The rear adjuster screw allows you to trim the nominal 35 mm stroke back by up to 30 mm. This creates an adjustable usable travel window of 5 to 35 mm, letting you fine-tune the retract end position without changing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X35-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X35-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.